多功能拉力机 橡胶拉力机

手机版详情

CL series multi-function electronic tension machine (30T) 300kN

1.     Brief Introduction

CL-300KN series multi-functional electronic tension machine is used to measure the mechanical properties of various materials such as tensile, compression, bending, shearing, tearing and peeling.

This machine is a Longmen rack with a novel and elegant appearance. The computer digital speed regulation system is equipped with force sensor and automatic tracking device. The data acquisition, storage, processing and printing test results of the electrical appliances using PC and interface circuit board can be used to calculate some basic physical parameters of the material bottom, such as maximum force, yield force, average peeling force and maximum deformation. During the test, the microcomputer collects the force and deformation signals in real time, and the software displays the "force-displacement" curve. After the test, the parameters are automatically calculated and saved, and the required bottom report form can be printed out.

2.         Structure Principle

  The main engine is composed of electronic speed regulation system, transmission mechanism, force measuring system and elongation automatic tracking device.

Electronic speed control system: This machine adopts AC speed control, corresponding to the stretching speed of 1-Xmm/min (X is the user's requirement), to return at the highest speed.

Transmission mechanism: The motor drives the screw synchronously through the reducer, and the two screw synchronously drives the moving beam.

Force measuring system: The force sensor is installed on the moving beam of the main engine (the sensor is only subjected to vertical force, not torsion and direction finding force) to ensure accurate force measurement. During the test, the force of the sample can be changed from the sensor into electrical signal input.

Elongation tracking device: This device is used to measure the deformation of the specimen. It can be tracked by an external tracker or by a built-in tracker. It can also be tracked without the tracker.

3.         Main Technical Parameters.

3.1 force resolution: 0.01N

3.2 system accuracy: less than + 0.3%

3.3 speed range: 0 - 150mm/min (special requirement can be fixed).

3.4 elongation tracking error: + 0.1mm

3.5 supply voltage: AC380V + 10%50Hz

3.6 external dimensions (length * width * height): 870mm * 780mm * 2250mm

3.7 net weight: 600KG

4.Features Of Multifunctional Electronic Pull Machine

Automatic clearing: after the computer controlled test instructions, the system automatically cleared.

High intelligence: after the test is finished, the fault is automatically judged, and the fixture automatically returns to the initial position.

Multi function: different fixtures can be replaced to carry out different tests.

Automatic shift: according to the size of the load, switching different grades.

Speed change: test speed can be changed arbitrarily.

Control methods: Test methods such as test force, test speed, displacement and strain can be selected.

Super function: record test data in whole process. Provides storage, comparison and tracking functions, the mouse can be used to arbitrarily find the test curve point-by-point force and deformation data analysis, and local enlargement contrast.

Multiple protection: automatic limit and overload automatic protection function.

Automatic calculation: automatic calculation of various test results, and any modification to the report.

Automatic length measurement: equipped with high precision encoder to automatically measure displacement and elongation between punctuation points.

High taste: fine carving, smooth lines, coupled with high-precision hardware and software technology and integration capabilities, fully reflects the exquisite manufacturing process and dexterous strength.

5. Configuration

6.1, Longmen double column.

7.2. One high-precision sensor.

3. High precision photoelectric automatic tracker.

4, universal testing machine software has the functions of automatic calculation, storage and contrast.

5, there are two choices of manual operation panel and software operation panel.

6. High-precision military enterprises produce screw rods.

7. High performance motor drive, no noise, no vibration, smooth operation.

8. Special test fixture

9, 19 inch Tsinghua Tongfang LCD computer, HP color printer.